Buy Incoloy 825 spiral wound gaskets direct from Ningbo Kaxite Sealing Materials Co., Ltd., a China-based manufacturer and exporter. Incoloy 825 / UNS N08825 is an austenitic nickel-iron-chromium-molybdenum-copper alloy with a titanium addition that stabilizes the alloy against intergranular corrosion. It offers exceptional resistance to chloride stress corrosion cracking, crevice corrosion and general corrosion, with high temperature strength and high creep rupture strength, making it one of the two most important nickel alloys in the oil and gas industry alongside Inconel 625.
This page is written for procurement engineers, MRO buyers, chemical and petrochemical project sourcing teams and EPC contractors who need a reliable Incoloy 825 spiral wound gasket manufacturer. Whether you are comparing quotes, verifying material certificates or scheduling a bulk delivery for a sour-service, pickling or nuclear-fuel-processing project, the sections below cover the technical facts and commercial terms you need to place a firm order.
High nickel content combined with molybdenum and copper provides corrosion resistance in reducing environments that stainless steel cannot match.
Exceptional resistance to chloride stress corrosion cracking, crevice corrosion and general corrosion in chemical and oil and gas service.
The titanium addition stabilizes the alloy against intergranular corrosion — important for hot and acidic process streams.
High temperature strength and high creep rupture strength for demanding chemical, refinery and nuclear service.
Custom sizes, non-standard dimensions, OEM marking and private-label packaging for B2B and project buyers.
MOQ 10 pcs, lead time 7–30 days, FOB / CIF / freight-inclusive quotation on request, worldwide shipping.
An Incoloy 825 spiral wound gasket consists of a winding ring made of V-shape Incoloy 825 strip tape and PTFE or graphite filler, then combined with an inner ring or outer centering guide ring. Incoloy 825 spiral wound gasket has enhanced corrosion resistance in a wide range of environments, high temperature strength and high creep rupture strength.
In the oil and gas industry, the two most important nickel alloys are Inconel 625 and Incoloy 825. Incoloy 825 is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, copper and molybdenum to provide high levels of corrosion resistance to both moderately oxidizing and moderately reducing environments. This balance of alloying elements grants this alloy exceptional resistance to chloride stress corrosion cracking, as well as crevice corrosion and general corrosion. The high level of nickel combined with the molybdenum and copper content produces substantially improved corrosion resistance in corrosive environments such as reducing environments compared with stainless steel. The addition of titanium in this alloy also helps to stabilize the alloy against intergranular corrosion.
The following values are typical for Incoloy 825 alloy used in spiral wound gasket winding tape. The nickel, chromium, molybdenum and copper balance is what gives UNS N08825 its resistance to both reducing and oxidizing environments, and the titanium addition stabilizes the alloy against intergranular corrosion.
| Element | Fe | Cr | Ni | Mo | Cu | C | Al | Ti |
|---|---|---|---|---|---|---|---|---|
| Typical value (%) | ≥22 | 19–23.5 | 38–46 | 2.5–3.5 | 1.5–3.0 | ≤0.05 | ≤0.2 | ≤1.2 |
Molybdenum and copper are the two elements that give Incoloy 825 its resistance to reducing environments, while chromium and nickel provide the oxidizing resistance. Titanium stabilizes the alloy against intergranular corrosion. For a specific heat analysis, request the material certificate with your order. Composition and mechanical values will be confirmed against the mill certificate before shipment.
The following values are typical for Incoloy 825 in the annealed condition. The alloy combines high temperature strength with high creep rupture strength, making it suitable for chemical, refinery and nuclear service where both temperature and corrosive media are present.
Incoloy 825 and Inconel 625 are the two most important nickel alloys in the oil and gas industry, but they are not interchangeable. The choice depends on the process medium, temperature, sour service requirement and cost target. Use the comparison below as a starting point, then send the exact medium and operating conditions for a firm recommendation.
| Property | Incoloy 825 / UNS N08825 | Inconel 625 / UNS N06625 |
|---|---|---|
| Base chemistry | Austenitic Ni-Fe-Cr-Mo-Cu with Ti stabilization | Ni-Cr-Mo-Nb alloy |
| Reducing environment | Excellent — Cu + Mo + high Ni | Good — Mo + Nb |
| Oxidizing environment | Very good — Cr + Ni | Excellent — higher Cr + Mo + Nb |
| Chloride SCC | Exceptional | Exceptional |
| Creep rupture strength | High | Higher |
| Typical gasket service | Chemical processing, pollution control, oil and gas recovery, pickling, nuclear fuel | Sour service, marine, high-temperature aerospace and chemical |
| Cost positioning | Lower cost of the two | Premium when Nb and higher Mo are required |
If the medium is moderately reducing or moderately oxidizing, Incoloy 825 is normally the cost-effective choice. If the service is highly corrosive, high-temperature or requires maximum creep rupture strength, Inconel 625 is specified instead. Send the medium, temperature and pressure for a firm recommendation.
Incoloy 825 spiral wound gaskets are well used for chemical processing components, pollution control, oil and gas recovery, pickling tank parts and nuclear fuel processing. The alloy is specified when the flange joint must handle both moderately reducing and moderately oxidizing media, chloride stress corrosion cracking or high-temperature service.
Reactors, columns, heat exchangers, piping and vessels handling mixed acid, chloride and oxidizing media.
Flue gas desulfurization, scrubber and wastewater systems where chloride and acid resistance are required.
Upstream and midstream flanged joints where sour service, CO₂ and chloride-bearing production fluids are present.
Sulfuric and mixed-acid pickling lines where stainless steel would suffer rapid attack.
Nuclear fuel reprocessing and related chemical service where chloride SCC and intergranular corrosion must be avoided.
Seawater and marine flanged connections where chloride pitting and crevice corrosion are critical.
The winding alloy is only one half of the gasket. The filler must also be compatible with the process medium and operating temperature. For Incoloy 825 the standard fillers are PTFE and graphite, with other options quoted on request.
Excellent chemical resistance against most acids, alkalis, organic acids, inorganic acids and solvents. Preferred for chemical, pickling, acid and low-temperature service when the gasket is paired with a nickel alloy winding.
High-temperature sealing performance for steam, hydrocarbon and refinery service. Preferred when the operating temperature is above the PTFE service envelope and the medium is compatible with graphite.
If your service is sour, high-temperature or chloride-bearing, send the H₂S partial pressure, chloride concentration, operating temperature and pressure so we can confirm the correct filler and winding combination.
Send the following five items with your enquiry. If you already have a flange drawing or an existing gasket sample, attach it and we will match it directly. Our sales engineers reply with a firm unit price, lead time and available samples.
NPS, DN or specific inner and outer diameters for non-standard joints.
Class 150, 300, 600, 900, 1500, 2500 or PN10 to PN250, plus the flange standard such as ASME B16.5 or EN 1092.
PTFE or graphite as standard; other fillers quoted on request depending on the medium and temperature.
Carbon steel painted as standard; SS 304, SS 316 or Incoloy 825 available for corrosive environments. Specify private-label or OEM marking if required.
Order quantity and destination port so we can quote FOB, CIF or freight-inclusive pricing. MOQ 10 pieces.
Send your flange standard, nominal pipe size, pressure class, filler, inner and outer ring material and quantity. Our sales engineers reply with a firm unit price, lead time and available samples. For urgent chemical, sour-service or nuclear requirements, contact us by phone or WhatsApp.
Address
No 432 Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China
